WWA strip support & parallel I2S for S2/S3 (bumping outputs from 5/4 to 12)

.gitignore

@@ -15,6 +15,7 @@ wled-update.sh
 
 /build_output/
 /node_modules/
+/logs/
 
 /wled00/extLibs
 /wled00/LittleFS

platformio.ini

@@ -138,7 +138,7 @@ lib_compat_mode = strict
 lib_deps =
     fastled/FastLED @ 3.6.0
     IRremoteESP8266 @ 2.8.2
-    makuna/NeoPixelBus @ 2.8.0
+    makuna/NeoPixelBus @ 2.8.3
     #https://github.com/makuna/NeoPixelBus.git#CoreShaderBeta
     https://github.com/Aircoookie/ESPAsyncWebServer.git#v2.2.1
   # for I2C interface

wled00/FX.h

@@ -1,3 +1,4 @@
+#pragma once
 /*
   WS2812FX.h - Library for WS2812 LED effects.
   Harm Aldick - 2016
@@ -8,12 +9,15 @@
   Adapted from code originally licensed under the MIT license
 
   Modified for WLED
+
+  Segment class/struct (c) 2022 Blaz Kristan (@blazoncek)
 */
 
 #ifndef WS2812FX_h
 #define WS2812FX_h
 
 #include <vector>
+#include "wled.h"
 
 #include "const.h"
 #include "bus_manager.h"
@@ -71,18 +75,15 @@ extern byte realtimeMode;           // used in getMappedPixelIndex()
 /* each segment uses 82 bytes of SRAM memory, so if you're application fails because of
   insufficient memory, decreasing MAX_NUM_SEGMENTS may help */
 #ifdef ESP8266
-  #define MAX_NUM_SEGMENTS    16
+  #define MAX_NUM_SEGMENTS  16
   /* How much data bytes all segments combined may allocate */
   #define MAX_SEGMENT_DATA  5120
+#elif defined(CONFIG_IDF_TARGET_ESP32S2)
+  #define MAX_NUM_SEGMENTS  20
+  #define MAX_SEGMENT_DATA  (MAX_NUM_SEGMENTS*512)  // 10k by default (S2 is short on free RAM)
 #else
-  #ifndef MAX_NUM_SEGMENTS
-    #define MAX_NUM_SEGMENTS  32
-  #endif
-  #if defined(ARDUINO_ARCH_ESP32S2)
-    #define MAX_SEGMENT_DATA  (MAX_NUM_SEGMENTS*768)  // 24k by default (S2 is short on free RAM)
-  #else
-    #define MAX_SEGMENT_DATA  (MAX_NUM_SEGMENTS*1280) // 40k by default
-  #endif
+  #define MAX_NUM_SEGMENTS  32  // warning: going beyond 32 may consume too much RAM for stable operation
+  #define MAX_SEGMENT_DATA  (MAX_NUM_SEGMENTS*1280) // 40k by default
 #endif
 
 /* How much data bytes each segment should max allocate to leave enough space for other segments,
@@ -543,6 +544,8 @@ typedef struct Segment {
     inline uint16_t groupLength()        const { return grouping + spacing; }
     inline uint8_t  getLightCapabilities() const { return _capabilities; }
     inline void     deactivate()               { setGeometry(0,0); }
+    inline Segment &clearName()                { if (name) free(name); name = nullptr; return *this; }
+    inline Segment &setName(const String &name) { return setName(name.c_str()); }
 
     inline static unsigned getUsedSegmentData()            { return Segment::_usedSegmentData; }
     inline static void     addUsedSegmentData(int len)     { Segment::_usedSegmentData += len; }
@@ -565,6 +568,7 @@ typedef struct Segment {
     Segment &setOption(uint8_t n, bool val);
     Segment &setMode(uint8_t fx, bool loadDefaults = false);
     Segment &setPalette(uint8_t pal);
+    Segment &setName(const char* name);
     uint8_t differs(const Segment& b) const;
     void    refreshLightCapabilities();
 
@@ -736,7 +740,6 @@ class WS2812FX {  // 96 bytes
     WS2812FX() :
       paletteFade(0),
       paletteBlend(0),
-      cctBlending(0),
       now(millis()),
       timebase(0),
       isMatrix(false),
@@ -839,7 +842,6 @@ class WS2812FX {  // 96 bytes
 
     uint8_t
       paletteBlend,
-      cctBlending,
       getActiveSegmentsNum() const,
       getFirstSelectedSegId() const,
       getLastActiveSegmentId() const,

wled00/FX_fcn.cpp

@@ -613,6 +613,19 @@ Segment &Segment::setPalette(uint8_t pal) {
   return *this;
 }
 
+Segment &Segment::setName(const char *newName) {
+  if (newName) {
+    const int newLen = min(strlen(newName), (size_t)WLED_MAX_SEGNAME_LEN);
+    if (newLen) {
+      if (name) name = static_cast<char*>(realloc(name, newLen+1));
+      else      name = static_cast<char*>(malloc(newLen+1));
+      if (name) strlcpy(name, newName, newLen);
+      return *this;
+    }
+  }
+  return clearName();
+}
+
 // 2D matrix
 unsigned Segment::virtualWidth() const {
   unsigned groupLen = groupLength();
@@ -1220,6 +1233,33 @@ void WS2812FX::finalizeInit() {
 
   _hasWhiteChannel = _isOffRefreshRequired = false;
 
+  unsigned digitalCount = 0;
+  #if defined(ARDUINO_ARCH_ESP32) && !defined(CONFIG_IDF_TARGET_ESP32C3)
+  // determine if it is sensible to use parallel I2S outputs on ESP32 (i.e. more than 5 outputs = 1 I2S + 4 RMT)
+  unsigned maxLedsOnBus = 0;
+  for (const auto &bus : busConfigs) {
+    if (Bus::isDigital(bus.type) && !Bus::is2Pin(bus.type)) {
+      digitalCount++;
+      if (bus.count > maxLedsOnBus) maxLedsOnBus = bus.count;
+    }
+  }
+  DEBUG_PRINTF_P(PSTR("Maximum LEDs on a bus: %u\nDigital buses: %u\n"), maxLedsOnBus, digitalCount);
+  // we may remove 300 LEDs per bus limit when NeoPixelBus is updated beyond 2.9.0
+  if (maxLedsOnBus <= 300 && useParallelI2S) BusManager::useParallelOutput(); // must call before creating buses
+  else useParallelI2S = false; // enforce single I2S
+  #endif
+
+  // create buses/outputs
+  unsigned mem = 0;
+  digitalCount = 0;
+  for (const auto &bus : busConfigs) {
+    mem += bus.memUsage(Bus::isDigital(bus.type) && !Bus::is2Pin(bus.type) ? digitalCount++ : 0); // includes global buffer
+    if (mem <= MAX_LED_MEMORY) BusManager::add(bus);
+    else DEBUG_PRINTF_P(PSTR("Out of LED memory! Bus %d (%d) #%u not created."), (int)bus.type, (int)bus.count, digitalCount);
+  }
+  busConfigs.clear();
+  busConfigs.shrink_to_fit();
+
   //if busses failed to load, add default (fresh install, FS issue, ...)
   if (BusManager::getNumBusses() == 0) {
     DEBUG_PRINTLN(F("No busses, init default"));
@@ -1235,6 +1275,7 @@ void WS2812FX::finalizeInit() {
 
     unsigned prevLen = 0;
     unsigned pinsIndex = 0;
+    digitalCount = 0;
     for (unsigned i = 0; i < WLED_MAX_BUSSES+WLED_MIN_VIRTUAL_BUSSES; i++) {
       uint8_t defPin[OUTPUT_MAX_PINS];
       // if we have less types than requested outputs and they do not align, use last known type to set current type
@@ -1299,9 +1340,11 @@ void WS2812FX::finalizeInit() {
       if (Bus::isPWM(dataType) || Bus::isOnOff(dataType)) count = 1;
       prevLen += count;
       BusConfig defCfg = BusConfig(dataType, defPin, start, count, DEFAULT_LED_COLOR_ORDER, false, 0, RGBW_MODE_MANUAL_ONLY, 0, useGlobalLedBuffer);
+      mem += defCfg.memUsage(Bus::isDigital(dataType) && !Bus::is2Pin(dataType) ? digitalCount++ : 0);
       if (BusManager::add(defCfg) == -1) break;
     }
   }
+  DEBUG_PRINTF_P(PSTR("LED buffer size: %uB/%uB\n"), mem, BusManager::memUsage());
 
   _length = 0;
   for (int i=0; i<BusManager::getNumBusses(); i++) {
@@ -1318,6 +1361,7 @@ void WS2812FX::finalizeInit() {
     // This must be done after all buses have been created, as some kinds (parallel I2S) interact
     bus->begin();
   }
+  DEBUG_PRINTF_P(PSTR("Heap after buses: %d\n"), ESP.getFreeHeap());
 
   Segment::maxWidth  = _length;
   Segment::maxHeight = 1;