"context deadline exceeded"

[ebbek]

Hi

Environment: Powershell 7.4.3

When I run oh-my-posh update on an already updated OMP, I get the message in the subject. What does that mean?

[JanDeDobbeleer]

That we are unable to get information from GitHub in time. I will update the timeout.

[ebbek]

Thanks for the information.

I should add that I don't see this message in Ubuntu 24.04 running in WSL on the same machine, And this holds for both bash and pwsh.

[evilbaschdi]

any update on this? the problem persists!

[JanDeDobbeleer]

@evilbaschdi this is a client side issue, the timeout is 5 seconds already. Somehow GitHub isn't responding in a timely manner (could be proxy/Defender or some other configuration).

[evilbaschdi]

I understand! that could explain why I do not have that problem at the office where the internet connection is slightly faster (1000 Mbit/s
vs 250 Mbit/s).
But even having defender completly deactivated on windows 11 the problem still occurs.
Also interessting: The problem does not exist on a Debian machine inside the same network or even on a WSL machine hostet on the affected windows 11 device.

Since I'm using DHCP that network settings should be the same on each device. I do not have any proxy active.
Also I compared outputs of tracert / traceroute of windows and debian - no abnormalities.
The last things I've tried some minutes ago was to change the local DNS from my routers default IP to 8.8.8.8 and completly deactivated DNS over TLS inside my router. All without changes effect to the current situation.

What else could I try?

Edit:
Seems like the error occurs after 5 seconds. Do I have the possibility to raise that timeout on my own on my local machine?

[JanDeDobbeleer]

@evilbaschdi no, not yet. I'll see if I can up it. Although 5 seconds does imply it's not going to work when set to 10 either. It's a sub 1 second call under normal circumstances.

[mrwensveen]

I get this error when I'm on a VPN (possibly blocking github request or routing it through a very slow connection). If possible, check if you have a (slow) VPN running.

[znedw]

I've had this issue on one machine since switching on ipv6.... github doesn't support IPv6 and I think the timeout to fallback to IPv4 (happy eyeballs) can be more than 5 secs, so perhaps bumping it to 10 may allow enough time for the fallback...

[Bladehawke]

Can verify IPv6 as the culprit here as well

[soulpower11]

same, turned on IPv6 and got the error, turned it off and its fixed

[joaociocca]

this was srsly weird. I was having this same problem... then I read @JanDeDobbeleer saying that it's just a call to github, so it should be something of less than a second...

I decided to try a simple curl 'https://api.github.com/repos/JanDeDobbeleer/oh-my-posh/releases/latest', and after it I tried the update --force again and OMP updated without any trouble...