_BV was not declared in this scope while trying to compile Marlin #147

dc740 · 2019-07-07T15:34:44Z

The error log is extensive, but it simply complains about _BV being out of scope. This can be reproduced by compiling Marling on branch bugfix-2.0.x (I haven't tried the 1.1 branch)

#######
Workaround:
Locate the packages directory (linux: inside ~/.arduino15) and find the Arduino.h file inside MCUdude_corefiles directory.

~/.arduino15/packages/MightyCore/hardware/avr/2.0.4/cores/MCUdude_corefiles/Arduino.h
(update the version as needed)

Add this:

#ifndef _BV
#define _BV(bit) (1 << (bit))
#endif

#######

Error log when not using the workaround:

Arduino: 1.8.9 (Linux), Board: "ATmega1284, Yes (UART0), Standard pinout, 1284P, BOD 2.7V, LTO disabled, External 16 MHz"

In file included from /home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:19:0,
                 from /home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/Arduino.h:290,
                 from sketch/src/lcd/dogm/../../inc/../HAL/HAL_AVR/../shared/Marduino.h:33,
                 from sketch/src/lcd/dogm/../../inc/../HAL/HAL_AVR/HAL.h:27,
                 from sketch/src/lcd/dogm/../../inc/MarlinConfig.h:30,
                 from sketch/src/lcd/dogm/HAL_LCD_class_defines.h:24,
                 from sketch/src/lcd/dogm/ultralcd_DOGM.h:31,
                 from sketch/src/lcd/dogm/lcdprint_u8g.cpp:14:
/home/dc740/arduino-1.8.9/hardware/tools/avr/avr/include/avr/power.h: In function 'void clock_prescale_set(clock_div_t)':
/home/dc740/arduino-1.8.9/hardware/tools/avr/avr/include/avr/power.h:1511:31: error: '_BV' was not declared in this scope
     uint8_t __tmp = _BV(CLKPCE);
                               ^
In file included from /home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:14:0,
                 from /home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/Arduino.h:290,
                 from sketch/src/lcd/dogm/../../inc/../HAL/HAL_AVR/../shared/Marduino.h:33,
                 from sketch/src/lcd/dogm/../../inc/../HAL/HAL_AVR/HAL.h:27,
                 from sketch/src/lcd/dogm/../../inc/MarlinConfig.h:30,
                 from sketch/src/lcd/dogm/HAL_LCD_class_defines.h:24,
                 from sketch/src/lcd/dogm/ultralcd_DOGM.h:31,
                 from sketch/src/lcd/dogm/lcdprint_u8g.cpp:14:
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h: In function 'void enableSleep()':
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:81:5: error: '_BV' was not declared in this scope
     sleep_enable();
     ^
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h: In function 'void disableSleep()':
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:90:5: error: '_BV' was not declared in this scope
     sleep_disable();
     ^
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h: In function 'void sleepMode(uint8_t)':
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:102:9: error: '_BV' was not declared in this scope
         set_sleep_mode(SLEEP_MODE_IDLE);
         ^
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:107:9: error: '_BV' was not declared in this scope
         set_sleep_mode(SLEEP_MODE_ADC);
         ^
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:112:9: error: '_BV' was not declared in this scope
         set_sleep_mode(SLEEP_MODE_PWR_DOWN);
         ^
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:117:9: error: '_BV' was not declared in this scope
         set_sleep_mode(SLEEP_MODE_PWR_SAVE);
         ^
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:122:9: error: '_BV' was not declared in this scope
         set_sleep_mode(SLEEP_MODE_STANDBY);
         ^
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:127:9: error: '_BV' was not declared in this scope
         set_sleep_mode(SLEEP_MODE_EXT_STANDBY);
         ^
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h: In function 'void sleep()':
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:148:5: error: '_BV' was not declared in this scope
     sleep_mode();
     ^
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:148:5: error: '_BV' was not declared in this scope
     sleep_mode();
     ^
In file included from /home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:19:0,
                 from /home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/Arduino.h:290,
                 from sketch/src/lcd/dogm/../../inc/../HAL/HAL_AVR/../shared/Marduino.h:33,
                 from sketch/src/lcd/dogm/../../inc/../HAL/HAL_AVR/HAL.h:27,
                 from sketch/src/lcd/dogm/../../inc/MarlinConfig.h:30,
                 from sketch/src/lcd/dogm/HAL_LCD_class_defines.h:24,
                 from sketch/src/lcd/dogm/ultralcd_DOGM.h:31,
                 from sketch/src/lcd/dogm/ultralcd_DOGM.cpp:42:
/home/dc740/arduino-1.8.9/hardware/tools/avr/avr/include/avr/power.h: In function 'void clock_prescale_set(clock_div_t)':
/home/dc740/arduino-1.8.9/hardware/tools/avr/avr/include/avr/power.h:1511:31: error: '_BV' was not declared in this scope
     uint8_t __tmp = _BV(CLKPCE);
                               ^
In file included from /home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:14:0,
                 from /home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/Arduino.h:290,
                 from sketch/src/lcd/dogm/../../inc/../HAL/HAL_AVR/../shared/Marduino.h:33,
                 from sketch/src/lcd/dogm/../../inc/../HAL/HAL_AVR/HAL.h:27,
                 from sketch/src/lcd/dogm/../../inc/MarlinConfig.h:30,
                 from sketch/src/lcd/dogm/HAL_LCD_class_defines.h:24,
                 from sketch/src/lcd/dogm/ultralcd_DOGM.h:31,
                 from sketch/src/lcd/dogm/ultralcd_DOGM.cpp:42:
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h: In function 'void enableSleep()':
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:81:5: error: '_BV' was not declared in this scope
     sleep_enable();
     ^
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h: In function 'void disableSleep()':
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:90:5: error: '_BV' was not declared in this scope
     sleep_disable();
     ^
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h: In function 'void sleepMode(uint8_t)':
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:102:9: error: '_BV' was not declared in this scope
         set_sleep_mode(SLEEP_MODE_IDLE);
         ^
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:107:9: error: '_BV' was not declared in this scope
         set_sleep_mode(SLEEP_MODE_ADC);
         ^
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:112:9: error: '_BV' was not declared in this scope
         set_sleep_mode(SLEEP_MODE_PWR_DOWN);
         ^
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:117:9: error: '_BV' was not declared in this scope
         set_sleep_mode(SLEEP_MODE_PWR_SAVE);
         ^
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:122:9: error: '_BV' was not declared in this scope
         set_sleep_mode(SLEEP_MODE_STANDBY);
         ^
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:127:9: error: '_BV' was not declared in this scope
         set_sleep_mode(SLEEP_MODE_EXT_STANDBY);
         ^
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h: In function 'void sleep()':
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:148:5: error: '_BV' was not declared in this scope
     sleep_mode();
     ^
/home/dc740/.arduino15/packages/MightyCore/hardware/avr/2.0.2/cores/MCUdude_corefiles/wiring_extras.h:148:5: error: '_BV' was not declared in this scope
     sleep_mode();
     ^
exit status 1
Error compiling for board ATmega1284.

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

The text was updated successfully, but these errors were encountered:

MCUdude · 2019-07-07T15:48:14Z

I have no experience with the Marlin FW. What happens if you add #include <avr/sfr_defs.h> to the top of the INO file?

dc740 · 2019-07-07T18:09:46Z

I get exactly the same error

dc740 · 2019-07-07T18:29:23Z

OK, I got around it by manually defining _BV in the power.h file. So, basically, adding #define _BV(bit) (1 << (bit)) inside of ~/arduino-1.8.9/hardware/tools/avr/avr/include/avr/power.h seems to be a good workaround. Adding it at the top of the .ino file made no difference, nor adding the .h file

A member of the arduino forums made me notice that MightyCore code is using the standard arduino pinout. I need to change this to the Sanguino pinout (Tools > Pinout > Sanguino).

msalajka · 2019-07-17T23:34:08Z

i've tried it (Marlin bugfix-2.0.x) with Ender 3 (board v1.1.4).

good place to put fix is:
..\packages\MightyCore\hardware\avr\2.0.2\cores\MCUdude_corefiles\Arduino.h

#ifndef _BV
#define _BV(bit) (1 << (bit))
#endif

MightyCore/ATmega1284 setup:

Clock External 16 MHz
BOD disabled
LTO disabled
Sanguino pinout
1284P variant
Bootloader UART0

bootloader burned via USBasp, Marlin firmware uploaded via usb.
Sketch uses 129972 bytes (99%) of program storage space.
With LTO enabled, sketch uses 122708 bytes (94%) of program storage space.

It works ok. ;)

dc740 · 2019-07-18T01:00:20Z

Same here. I updated my comment to reflect the fact that I was doing it wrong. I enabled BOD to 2.7 and it works OK too

MCUdude · 2020-05-15T10:20:31Z

I'm curious; I've recently upgraded my old DIY Prusa i3 from 2014 with a brand new 32-bit board. I've also used PlatformIO to build the latest Marlin. But why are you using MightyCore for building for the ATmega1284P? I mean, that's completely fine, but I thought Marlin favored the Sanguino core? Is it to save flash?

SpenceKonde · 2020-05-24T10:06:16Z

_BV should be defined by the core, it is widely used in existing code. I would characterize this a bug in the core.

MCUdude · 2020-05-24T14:20:41Z

What's weird is that _BV works great in Arduino IDE and in PlatformIO projects. There's something with the Marlin build that's causing this. However, I haven't really looked into it.

I would characterize this a bug in the core.

In the core like in this core?

SpenceKonde · 2020-05-24T14:36:06Z

Wait, I assumed the Marlin FW was being compiled within the Arduino IDE context - is it not?

…

On Sun, May 24, 2020 at 10:20 AM Hans ***@***.***> wrote: What's weird is that _BV works great in Arduino IDE and in PlatformIO projects. There's something with the Marlin build that's causing this. However, I haven't really looked into it. I would characterize this a bug in the core. In the core like in *this* core? — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#147 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABTXEW3BH5D2TYCJUQZGJQTRTEUMNANCNFSM4H6V6XPA> .

--

____________ Spence Konde Azzy’S Electronics New products! Check them out at tindie.com/stores/DrAzzy GitHub: github.com/SpenceKonde ATTinyCore: Arduino support for almost every ATTiny microcontroller Contact: [email protected]

MCUdude · 2020-05-24T17:02:39Z

For 8-bit AVR boards you can use both. For 32-bit you can only use PlatformIO. However, I don't see any reason not to use PlatformIO for a project as large as this. PlatformIO/VSCode is much better at handling multiple files.

SpenceKonde · 2020-05-24T19:12:39Z

You can say that again (having just thrown two weeks of precious quarantimes into the rathole called jtag2updi, when I *wanted* to be working on 'da core y'all been waiting for - compiling with Arduino IDE since I now know that shitshow like the back of my hand - and exiting it every time I make changes in the wrong editor to make sure it picks them up! ) I have such amazing plans for Delta Alpha Charlie oscar romeo echo - that shit is gonna be fucking BALLER! That memory section shit, aw man - that was the missing piece of the puzzle! I'm gonna use the "fast IO" trick to make a fast-pinmode (I'm gonna bring that to megaTinyCore, and you can ofc steal it too - but I can make even normal pinmode calls faster on these new parts because of that pinctrl setting register (i find it HILARIOUS that they put warnings about how confusing the set and clear registers were, considering the bloody important stuff they neglected to put such a warning by and which is like, mad counterintuitive - like, FFS they didn't warn people about the wacky behavior of the third byte in the UPDI address pointer, they don't tell people that bits 1 and 7 in the ASI status register mean something, or even how to check the silicon rev* - yet they warn people about the set and clear registers? What?!) Maybe that's a little pejorative - it was a rabbit hole for the first 3-4 days, but since then, it's been a straight up rathole, and I am so sick of it (that's why I haven't been around - though the new jtag2updi will be way better than the old one. It doesn't glitch out and hang like it used to, and it also doesn't run first dozen milliseconds or so of the sketch several times during the programming process either, and it programs DA-series parts, and it has a proper debug channel (via SPI if the thing it's running on doesn't have a second USART - could *not* have made it work without that! I mean, I made rudimentary debug work on tinyAVR 0-series and 1-series parts via pinswapping, but that... was not fit for purpose in real-world conditions...). It also disables response signature during burst writes to improve throughput. * A particularly egregious omission, what with the silicon errata for the current rev of you know what parts being enough to bring a grown man to tears!

…

On Sun, May 24, 2020 at 1:02 PM Hans ***@***.***> wrote: For 8-bit AVR boards you can use both. For 32-bit you can only use PlatformIO. However, I don't see any reason not to use PlatformIO for a project as large as this. PlatformIO/VSCode is much better at handling multiple files. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#147 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABTXEW5FUXHNWVEOVLUUJZLRTFHLVANCNFSM4H6V6XPA> .

--

____________ Spence Konde Azzy’S Electronics New products! Check them out at tindie.com/stores/DrAzzy GitHub: github.com/SpenceKonde ATTinyCore: Arduino support for almost every ATTiny microcontroller Contact: [email protected]

c--- · 2022-05-19T08:38:00Z

The problem is caused by dependency cycles in MightyCore(?). I don't know where all of them are but at least between wiring_extras.h and Arduino.h which both include each other.

The solution was simply to remove the #include "wiring_extras.h" from Arduino.h. I don't know all the use cases for MightyCore so I don't know if this is a fix for anything other than my version of Marlin. Someone should probably spend some time "flattening" the dependency graph in the code base as this could both prevent errors and possibly speed up compilation.

If you enable verbose compilation in Arduino you can just copy/paste any (failing) gcc command and add the -E option to see what's going on in the preprocessor. This output is difficult to parse though. I don't know if there are maybe tools or options that can show everything in a more organized way.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

_BV was not declared in this scope while trying to compile Marlin #147

_BV was not declared in this scope while trying to compile Marlin #147

dc740 commented Jul 7, 2019 •

edited

Loading

MCUdude commented Jul 7, 2019

dc740 commented Jul 7, 2019

dc740 commented Jul 7, 2019 •

edited

Loading

msalajka commented Jul 17, 2019

dc740 commented Jul 18, 2019

MCUdude commented May 15, 2020 •

edited

Loading

SpenceKonde commented May 24, 2020 •

edited

Loading

MCUdude commented May 24, 2020

SpenceKonde commented May 24, 2020 via email

MCUdude commented May 24, 2020

SpenceKonde commented May 24, 2020 via email •

edited

Loading

c--- commented May 19, 2022

_BV was not declared in this scope while trying to compile Marlin #147

_BV was not declared in this scope while trying to compile Marlin #147

Comments

dc740 commented Jul 7, 2019 • edited Loading

MCUdude commented Jul 7, 2019

dc740 commented Jul 7, 2019

dc740 commented Jul 7, 2019 • edited Loading

msalajka commented Jul 17, 2019

dc740 commented Jul 18, 2019

MCUdude commented May 15, 2020 • edited Loading

SpenceKonde commented May 24, 2020 • edited Loading

MCUdude commented May 24, 2020

SpenceKonde commented May 24, 2020 via email

MCUdude commented May 24, 2020

SpenceKonde commented May 24, 2020 via email • edited Loading

c--- commented May 19, 2022

dc740 commented Jul 7, 2019 •

edited

Loading

dc740 commented Jul 7, 2019 •

edited

Loading

MCUdude commented May 15, 2020 •

edited

Loading

SpenceKonde commented May 24, 2020 •

edited

Loading

SpenceKonde commented May 24, 2020 via email •

edited

Loading