config_complete.yaml

######################################
## Honeycomb Refinery Configuration ##
######################################
#
# created on 2024-03-12 at 17:25:49 UTC from ../../config.yaml using a template generated on 2024-03-12 at 17:25:37 UTC

# This file contains a configuration for the Honeycomb Refinery. It is in YAML
# format, organized into named groups, each of which contains a set of
# configuration values. Text preceded by two comment characters (##) is
# informational only. Text preceded by a single comment character (#) indicates
# a value that is commented out and not used; it should be uncommented to enable
# it.


###########################
## General Configuration ##
###########################
General:
  ## General contains general configuration options that apply to the
  ## entire Refinery process.
  ####
    ## ConfigurationVersion is the file format of this particular
    ## configuration file.
    ##
    ## This file is version 2.
    ## This field is required. It exists to allow the configuration system to
    ## adapt to future changes in the configuration file format.
    ##
    ## default: 2
    ## Not eligible for live reload.
    ConfigurationVersion: 2

    ## MinRefineryVersion is the minimum version of Refinery that can load
    ## this configuration file.
    ##
    ## This setting specifies the lowest Refinery version capable of loading
    ## all of the features used in this file. If this value is present, then
    ## Refinery will refuse to start if its version is less than this
    ## setting.
    ##
    ## default: v2.0
    ## Not eligible for live reload.
    MinRefineryVersion: v2.0

    ## DatasetPrefix is a prefix that can be used to distinguish a dataset
    ## from an environment in the rules.
    ##
    ## If telemetry is being sent to both a classic dataset and a new
    ## environment called the same thing, such as `production`, then this
    ## parameter can be used to distinguish these cases. When Refinery
    ## receives telemetry using an API key associated with a Honeycomb
    ## Classic dataset, it will then use the prefix in the form `{prefix}.
    ## {dataset}` when trying to resolve the rules definition.
    ##
    ## Not eligible for live reload.
    # DatasetPrefix: ""

    ## ConfigReloadInterval is the average interval between attempts at
    ## reloading the configuration file.
    ##
    ## Refinery will attempt to read its configuration and check for changes
    ## at approximately this interval. This time is varied by a random amount
    ## up to 10% to avoid all instances refreshing together. In installations
    ## where configuration changes are handled by restarting Refinery, which
    ## is often the case when using Kubernetes, disable this feature with a
    ## value of `0s`. If the config file is being loaded from a URL, it may
    ## be wise to increase this value to avoid overloading the file server.
    ##
    ## Accepts a duration string with units, like "15s".
    ## default: 15s
    ## Not eligible for live reload.
    # ConfigReloadInterval: 15s

###########################
## Network Configuration ##
###########################
Network:
  ## Network contains network configuration options.
  ####
    ## ListenAddr is the address where Refinery listens for incoming
    ## requests.
    ##
    ## This setting is the IP and port on which Refinery listens for incoming
    ## HTTP requests. These requests include traffic formatted as Honeycomb
    ## events, proxied requests to the Honeycomb API, and OpenTelemetry data
    ## using the `http` protocol. Incoming traffic is expected to be HTTP, so
    ## if SSL is a requirement, put something like `nginx` in front to do the
    ## decryption.
    ##
    ## Should be an ip:port like "0.0.0.0:8080".
    ## default: 0.0.0.0:8080
    ## Not eligible for live reload.
    # ListenAddr: "0.0.0.0:8080"

    ## PeerListenAddr is the IP and port on which to listen for traffic being
    ## rerouted from a peer.
    ##
    ## Incoming traffic is expected to be HTTP, so if using SSL use something
    ## like nginx or a load balancer to do the decryption.
    ##
    ## Should be an ip:port like "0.0.0.0:8081".
    ## default: 0.0.0.0:8081
    ## Not eligible for live reload.
    # PeerListenAddr: "0.0.0.0:8081"

    ## HTTPIdleTimeout is the duration the http server waits for activity on
    ## the connection.
    ##
    ## This is the amount of time after which if the http server does not see
    ## any activity, then it pings the client to see if the transport is
    ## still alive. "0s" means no timeout.
    ##
    ## Accepts a duration string with units, like "0s".
    ## default: 0s
    ## Not eligible for live reload.
    # HTTPIdleTimeout: 0s

    ## HoneycombAPI is the URL of the upstream Honeycomb API where the data
    ## will be sent.
    ##
    ## This setting is the destination to which Refinery sends all events
    ## that it decides to keep.
    ##
    ## default: https://api.honeycomb.io
    ## Eligible for live reload.
    # HoneycombAPI: "https://api.honeycomb.io"

##############################
## Access Key Configuration ##
##############################
AccessKeys:
  ## AccessKeys contains access keys -- API keys that the proxy will treat
  ## specially, and other flags that control how the proxy handles API
  ## keys.
  ##
  ####
    ## ReceiveKeys is a set of Honeycomb API keys that the proxy will treat
    ## specially.
    ##
    ## This list only applies to span traffic - other Honeycomb API actions
    ## will be proxied through to the upstream API directly without modifying
    ## keys.
    ##
    ## Not eligible for live reload.
    # ReceiveKeys:
      # - your-key-goes-here

    ## AcceptOnlyListedKeys is a boolean flag that causes events arriving
    ## with API keys not in the `ReceiveKeys` list to be rejected.
    ##
    ## If `true`, then only traffic using the keys listed in `ReceiveKeys` is
    ## accepted. Events arriving with API keys not in the `ReceiveKeys` list
    ## will be rejected with an HTTP `401` error.
    ## If `false`, then all traffic is accepted and `ReceiveKeys` is ignored.
    ##
    ## Eligible for live reload.
    # AcceptOnlyListedKeys: false

########################
## Refinery Telemetry ##
########################
RefineryTelemetry:
  ## RefineryTelemetry contains configuration information for the telemetry
  ## that Refinery uses to record its own operation.
  ####
    ## AddRuleReasonToTrace controls whether to decorate traces with Refinery
    ## rule evaluation results.
    ##
    ## When enabled, this setting causes traces that are sent to Honeycomb to
    ## include the field `meta.refinery.reason`. This field contains text
    ## indicating which rule was evaluated that caused the trace to be
    ## included.
    ## This setting also includes the field `meta.refinery.send_reason`,
    ## which contains the reason that the trace was sent. Possible values of
    ## this field are `trace_send_got_root`, which means that the root span
    ## arrived; `trace_send_expired`, which means that TraceTimeout was
    ## reached; `trace_send_ejected_full`, which means that the trace cache
    ## was full; and `trace_send_ejected_memsize`, which means that refinery
    ## was out of memory.
    ## These names are also the names of metrics that refinery tracks.
    ## We recommend enabling this setting whenever a rules-based sampler is
    ## in use, as it is useful for debugging and understanding the behavior
    ## of your Refinery installation.
    ##
    ## Eligible for live reload.
    # AddRuleReasonToTrace: false

    ## AddSpanCountToRoot controls whether to add a metadata field to root
    ## spans that indicates the number of child elements in a trace.
    ##
    ## The added metadata field, `meta.span_count`, indicates the number of
    ## child elements on the trace at the time the sampling decision was
    ## made. This value is available to the rules-based sampler, making it
    ## possible to write rules that are dependent upon the number of spans,
    ## span events, and span links in the trace. If `true` and
    ## `AddCountsToRoot` is set to false, then Refinery will add
    ## `meta.span_count` to the root span.
    ##
    ## default: true
    ## Eligible for live reload.
    # AddSpanCountToRoot: true

    ## AddCountsToRoot controls whether to add metadata fields to root spans
    ## that indicates the number of child spans, span events, span links, and
    ## honeycomb events.
    ##
    ## If `true`, then Refinery will ignore the `AddSpanCountToRoot` setting
    ## and add the following fields to the root span based on the values at
    ## the time the sampling decision was made:
    ## - `meta.span_count`: the number of child spans on the trace
    ## - `meta.span_event_count`: the number of span events on the trace
    ## - `meta.span_link_count`: the number of span links on the trace
    ## - `meta.event_count`: the number of honeycomb events on the trace
    ##
    ## Eligible for live reload.
    # AddCountsToRoot: false

    ## AddHostMetadataToTrace specifies whether to add host metadata to
    ## traces.
    ##
    ## If `true`, then Refinery will add the following tag to all traces: -
    ## `meta.refinery.local_hostname`: the hostname of the Refinery node
    ##
    ## default: true
    ## Eligible for live reload.
    # AddHostMetadataToTrace: true

############
## Traces ##
############
Traces:
  ## Traces contains configuration for how traces are managed.
  ####
    ## SendDelay is the duration to wait before sending a trace.
    ##
    ## This setting is a short timer that is triggered when a trace is
    ## complete. Refinery waits for this duration before sending the trace.
    ## The reason for this setting is to allow for small network delays or
    ## clock jitters to elapse and any final spans to arrive before sending
    ## the trace. Set to "0" for immediate sending.
    ##
    ## Accepts a duration string with units, like "2s".
    ## default: 2s
    ## Eligible for live reload.
    # SendDelay: 2s

    ## BatchTimeout is how frequently Refinery sends unfulfilled batches.
    ##
    ## By default, this setting uses the `DefaultBatchTimeout` in `libhoney`
    ## as its value, which is `100ms`.
    ##
    ## Accepts a duration string with units, like "500ms".
    ## Eligible for live reload.
    # BatchTimeout: 500ms

    ## TraceTimeout is the duration to wait before making the trace decision
    ## on an incomplete trace.
    ##
    ## A long timer; it represents the outside boundary of how long to wait
    ## before making the trace decision about an incomplete trace.
    ## Normally trace decisions (send or drop) are made when the root span
    ## arrives. Sometimes the root span never arrives (for example, due to
    ## crashes). Once this timer fires, Refinery will make a trace decision
    ## based on the spans that have arrived so far. This ensures sending a
    ## trace even when the root span never arrives.
    ## After the trace decision has been made, Refinery retains a record of
    ## that decision for a period of time. When additional spans (including
    ## the root span) arrive, they will be kept or dropped based on the
    ## original decision.
    ## If particularly long-lived traces are present in your data, then you
    ## should increase this timer. Note that this increase will also increase
    ## the memory requirements for Refinery.
    ##
    ## Accepts a duration string with units, like "60s".
    ## default: 60s
    ## Eligible for live reload.
    # TraceTimeout: 60s

    ## MaxBatchSize is the maximum number of events to be included in each
    ## batch for sending.
    ##
    ## This value is used to set the `BatchSize` field in the `libhoney`
    ## library used to send data to Honeycomb.
    ## If you have particularly large traces, then you should increase this
    ## value. Note that this will also increase the memory requirements for
    ## Refinery.
    ##
    ## default: 500
    ## Eligible for live reload.
    # MaxBatchSize: 500

    ## SendTicker is the interval between checks for traces to send.
    ##
    ## A short timer that determines the duration between trace cache review
    ## runs to send. Increasing this will spend more time processing incoming
    ## events to reduce `incoming_` or `peer_router_dropped` spikes.
    ## Decreasing this will check the trace cache for timeouts more
    ## frequently.
    ##
    ## Accepts a duration string with units, like "100ms".
    ## default: 100ms
    ## Eligible for live reload.
    # SendTicker: 100ms

###############
## Debugging ##
###############
Debugging:
  ## Debugging contains configuration values used when setting up and
  ## debugging Refinery.
  ####
    ## DebugServiceAddr is the IP and port where the debug service runs.
    ##
    ## The debug service is generally only used when debugging Refinery
    ## itself, and will only run if the command line option `-d` is
    ## specified. If this value is not specified, then the debug service runs
    ## on the first open port between `localhost:6060` and `localhost:6069`.
    ##
    ## Should be an ip:port like "localhost:6060".
    ## Not eligible for live reload.
    # DebugServiceAddr: "localhost:6060"

    ## QueryAuthToken is the token that must be specified to access the
    ## `/query` endpoint.
    ##
    ## This token must be specified with the header
    ## "X-Honeycomb-Refinery-Query" in order for a `/query` request to
    ## succeed. These `/query` requests are intended for debugging Refinery
    ## during setup and are not typically needed in normal operation. If not
    ## specified, then the `/query` endpoints are inaccessible.
    ##
    ## Not eligible for live reload.
    # QueryAuthToken: "some-private-value"

    ## AdditionalErrorFields is a list of span fields to include when logging
    ## errors happen during the ingestion of events.
    ##
    ## For example, the span too large error. This is primarily useful in
    ## trying to track down misbehaving senders in a large installation. The
    ## fields `dataset`, `apihost`, and `environment` are always included. If
    ## a field is not present in the span, then it will not be present in the
    ## error log.
    ##
    ## Eligible for live reload.
    # AdditionalErrorFields:
      # - trace.span_id

    ## DryRun controls whether sampling is applied to incoming traces.
    ##
    ## If enabled, then Refinery marks the traces that would be dropped given
    ## the current sampling rules, and sends all traces regardless of the
    ## sampling decision. This is useful for evaluating sampling rules.
    ## When DryRun is enabled, traces is decorated with `meta.refinery.
    ## dryrun.kept` that is set to `true` or `false`, based on whether the
    ## trace would be kept or dropped. In addition, `SampleRate` will be set
    ## to the incoming rate for all traces, and the field
    ## `meta.refinery.dryrun.sample_rate` will be set to the sample rate that
    ## would have been used.
    ##
    ## Eligible for live reload.
    # DryRun: true

#####################
## Refinery Logger ##
#####################
Logger:
  ## Logger contains configuration for logging.
  ####
    ## Type is the type of logger to use.
    ##
    ## The setting specifies where (and if) Refinery sends logs.
    ## `none` means that logs are discarded.
    ## `honeycomb` means that logs will be forwarded to Honeycomb as events
    ## according to the set Logging settings.
    ## `stdout` means that logs will be written to `stdout`.
    ##
    ## default: stdout
    ## Not eligible for live reload.
    ## Options: stdout honeycomb none
    # Type: stdout

    ## Level is the logging level above which Refinery should send a log to
    ## the logger.
    ##
    ## `warn` is the recommended level for production.
    ## `debug` is very verbose, and should not be used in production
    ## environments.
    ##
    ## default: warn
    ## Not eligible for live reload.
    ## Options: debug info warn error panic
    # Level: warn

######################
## Honeycomb Logger ##
######################
HoneycombLogger:
  ## HoneycombLogger contains configuration for logging to Honeycomb. Only
  ## used if `Logger.Type` is "honeycomb".
  ####
    ## APIHost is the URL of the Honeycomb API where Refinery sends its logs.
    ##
    ## Refinery's internal logs will be sent to this host using the standard
    ## Honeycomb Events API.
    ##
    ## default: https://api.honeycomb.io
    ## Not eligible for live reload.
    # APIHost: "https://api.honeycomb.io"

    ## APIKey is the API key used to send Refinery's logs to Honeycomb.
    ##
    ## It is recommended that you create a separate team and key for Refinery
    ## logs.
    ##
    ## Not eligible for live reload.
    # APIKey: SetThisToAHoneycombKey

    ## Dataset is the dataset to which logs will be sent.
    ##
    ## Only used if `APIKey` is specified.
    ##
    ## default: Refinery Logs
    ## Not eligible for live reload.
    # Dataset: ""

    ## SamplerEnabled controls whether logs are sampled before sending to
    ## Honeycomb.
    ##
    ## The sample rate is controlled by the `SamplerThroughput` setting. The
    ## sampler used throttles the rate of logs sent to Honeycomb from any
    ## given source within Refinery -- it should effectively limit the rate
    ## of redundant messages.
    ##
    ## default: true
    ## Not eligible for live reload.
    # SamplerEnabled: true

    ## SamplerThroughput is the sampling throughput for logs in events per
    ## second.
    ##
    ## The sampling algorithm attempts to make sure that the average
    ## throughput approximates this value, while also ensuring that all
    ## unique logs arrive at Honeycomb at least once per sampling period.
    ##
    ## default: 10
    ## Not eligible for live reload.
    # SamplerThroughput: 10

###################
## Stdout Logger ##
###################
StdoutLogger:
  ## StdoutLogger contains configuration for logging to `stdout`. Only used
  ## if `Logger.Type` is "stdout".
  ####
    ## Structured controls whether to use structured logging.
    ##
    ## `true` generates structured logs (JSON). `false` generates plain text
    ## logs.
    ##
    ## Not eligible for live reload.
    # Structured: false

    ## SamplerEnabled controls whether logs are sampled before sending to
    ## `stdout`.
    ##
    ## The sample rate is controlled by the `SamplerThroughput` setting.
    ##
    ## Not eligible for live reload.
    # SamplerEnabled: false

    ## SamplerThroughput is the sampling throughput for logs in events per
    ## second.
    ##
    ## The sampling algorithm attempts to make sure that the average
    ## throughput approximates this value, while also ensuring that all
    ## unique logs arrive at `stdout` at least once per sampling period.
    ##
    ## default: 10
    ## Not eligible for live reload.
    # SamplerThroughput: 10

########################
## Prometheus Metrics ##
########################
PrometheusMetrics:
  ## PrometheusMetrics contains configuration for Refinery's
  ## internally-generated metrics as made available through Prometheus.
  ####
    ## Enabled controls whether to expose Refinery metrics over the
    ## `PrometheusListenAddr` port.
    ##
    ## Each of the metrics providers can be enabled or disabled
    ## independently. Metrics can be sent to multiple destinations.
    ##
    ## Not eligible for live reload.
    # Enabled: false

    ## ListenAddr is the IP and port the Prometheus Metrics server will run
    ## on.
    ##
    ## Determines the interface and port on which Prometheus will listen for
    ## requests for `/metrics`. Must be different from the main Refinery
    ## listener. Only used if `Enabled` is `true` in `PrometheusMetrics`.
    ##
    ## Should be an ip:port like "localhost:2112".
    ## default: localhost:2112
    ## Not eligible for live reload.
    # ListenAddr: "localhost:2112"

####################
## Legacy Metrics ##
####################
LegacyMetrics:
  ## LegacyMetrics contains configuration for Refinery's legacy metrics.
  ## Version 1.x of Refinery used this format for sending Metrics to
  ## Honeycomb. The metrics generated that way are nonstandard and will be
  ## deprecated in a future release. New installations should prefer
  ## `OTelMetrics`.
  ##
  ####
    ## Enabled controls whether to send legacy-formatted metrics to
    ## Honeycomb.
    ##
    ## Each of the metrics providers can be enabled or disabled
    ## independently. Metrics can be sent to multiple destinations.
    ##
    ## Not eligible for live reload.
    # Enabled: false

    ## APIHost is the URL of the Honeycomb API where legacy metrics are sent.
    ##
    ## Refinery's internal metrics will be sent to this host using the
    ## standard Honeycomb Events API.
    ##
    ## default: https://api.honeycomb.io
    ## Not eligible for live reload.
    # APIHost: "https://api.honeycomb.io"

    ## APIKey is the API key used by Refinery to send its metrics to
    ## Honeycomb.
    ##
    ## It is recommended that you create a separate team and key for Refinery
    ## metrics.
    ##
    ## Not eligible for live reload.
    # APIKey: ""

    ## Dataset is the Honeycomb dataset where Refinery sends its metrics.
    ##
    ## Only used if `APIKey` is specified.
    ##
    ## default: Refinery Metrics
    ## Not eligible for live reload.
    # Dataset: "Refinery Metrics"

    ## ReportingInterval is the interval between sending legacy metrics to
    ## Honeycomb.
    ##
    ## Between 1 and 60 seconds is typical.
    ##
    ## Accepts a duration string with units, like "30s".
    ## default: 30s
    ## Not eligible for live reload.
    # ReportingInterval: ""

###########################
## OpenTelemetry Metrics ##
###########################
OTelMetrics:
  ## OTelMetrics contains configuration for Refinery's OpenTelemetry (OTel)
  ## metrics. This is the preferred way to send metrics to Honeycomb. New
  ## installations should prefer `OTelMetrics`.
  ##
  ####
    ## Enabled controls whether to send metrics via OpenTelemetry.
    ##
    ## Each of the metrics providers can be enabled or disabled
    ## independently. Metrics can be sent to multiple destinations.
    ##
    ## Not eligible for live reload.
    # Enabled: false

    ## APIHost is the URL of the OpenTelemetry API to which metrics will be
    ## sent.
    ##
    ## Refinery's internal metrics will be sent to the `/v1/metrics` endpoint
    ## on this host.
    ##
    ## default: https://api.honeycomb.io
    ## Not eligible for live reload.
    # APIHost: "https://api.honeycomb.io"

    ## APIKey is the API key used to send Honeycomb metrics via
    ## OpenTelemetry.
    ##
    ## It is recommended that you create a separate team and key for Refinery
    ## metrics.
    ## If this is blank, then Refinery will not set the Honeycomb-specific
    ## headers for OpenTelemetry, and your `APIHost` must be set to a valid
    ## OpenTelemetry endpoint.
    ##
    ## Not eligible for live reload.
    # APIKey: ""

    ## Dataset is the Honeycomb dataset that Refinery sends its OpenTelemetry
    ## metrics.
    ##
    ## Only used if `APIKey` is specified.
    ##
    ## default: Refinery Metrics
    ## Not eligible for live reload.
    # Dataset: "Refinery Metrics"

    ## ReportingInterval is the interval between sending OpenTelemetry
    ## metrics to Honeycomb.
    ##
    ## Between `1` and `60` seconds is typical.
    ##
    ## Accepts a duration string with units, like "30s".
    ## default: 30s
    ## Not eligible for live reload.
    # ReportingInterval: ""

    ## Compression is the compression algorithm to use when sending
    ## OpenTelemetry metrics to Honeycomb.
    ##
    ## `gzip` is the default and recommended value. In rare circumstances,
    ## compression costs may outweigh the benefits, in which case `none` may
    ## be used.
    ##
    ## default: gzip
    ## Not eligible for live reload.
    ## Options: none gzip
    # Compression: gzip

#####################
## Peer Management ##
#####################
PeerManagement:
  ## PeerManagement controls how the Refinery cluster communicates between
  ## peers.
  ####
    ## Type is the type of peer management to use.
    ##
    ## Peer management is the mechanism by which Refinery locates its peers.
    ## `file` means that Refinery gets its peer list from the Peers list in
    ## this config file.
    ## `redis` means that Refinery self-registers with a Redis instance and
    ## gets its peer list from there.
    ##
    ## default: file
    ## Not eligible for live reload.
    ## Options: redis file
    # Type: file

    ## Identifier specifies the identifier to use when registering itself
    ## with peers.
    ##
    ## By default, when using a peer registry, Refinery will use the local
    ## hostname to identify itself to other peers. If your environment
    ## requires something else, (for example, if peers cannot resolve each
    ## other by name), then you can specify the exact identifier, such as an
    ## IP address, to use here. Overrides `IdentifierInterfaceName`, if both
    ## are set.
    ##
    ## Not eligible for live reload.
    # Identifier: "192.168.1.1"

    ## IdentifierInterfaceName specifies a network interface to use when
    ## finding a local hostname.
    ##
    ## By default, when using a peer registry, Refinery will use the local
    ## hostname to identify itself to other peers. If your environment
    ## requires that you use IPs as identifiers (for example, if peers cannot
    ## resolve each other by name), then you can specify the network
    ## interface that Refinery is listening on here. Refinery will use the
    ## first unicast address that it finds on the specified network interface
    ## as its identifier.
    ##
    ## Not eligible for live reload.
    # IdentifierInterfaceName: eth0

    ## UseIPV6Identifier specifies that Refinery should use an IPV6 address
    ## as its identifier.
    ##
    ## If using `IdentifierInterfaceName`, Refinery will default to the first
    ## IPv4 unicast address it finds for the specified interface. If this
    ## value is specified, then Refinery will use the first IPV6 unicast
    ## address found.
    ##
    ## Not eligible for live reload.
    # UseIPV6Identifier: false

    ## Peers is the list of peers to use when Type is "file", excluding self.
    ##
    ## This list is ignored when Type is "redis". The format is a list of
    ## strings of the form "scheme://host:port".
    ##
    ## Not eligible for live reload.
    # Peers:
      # - http://192.168.1.11:8081
      # - http://192.168.1.12:8081

###########################
## Redis Peer Management ##
###########################
RedisPeerManagement:
  ## RedisPeerManagement controls how the Refinery cluster communicates
  ## between peers when using Redis. Only applies when
  ## `PeerManagement.Type` is "redis".
  ##
  ####
    ## Host is the host and port of the Redis instance to use for peer
    ## cluster membership management.
    ##
    ## Must be in the form `host:port`.
    ##
    ## Should be an ip:port like "localhost:6379".
    ## Not eligible for live reload.
    # Host: "localhost:6379"

    ## Username is the username used to connect to Redis for peer cluster
    ## membership management.
    ##
    ## Many Redis installations do not use this field.
    ##
    ## Not eligible for live reload.
    # Username: ""

    ## Password is the password used to connect to Redis for peer cluster
    ## membership management.
    ##
    ## Many Redis installations do not use this field.
    ##
    ## Not eligible for live reload.
    # Password: ""

    ## AuthCode is the string used to connect to Redis for peer cluster
    ## membership management using an explicit AUTH command.
    ##
    ## Many Redis installations do not use this field.
    ##
    ## Not eligible for live reload.
    # AuthCode: ""

    ## Prefix is a string used as a prefix for the keys in Redis while
    ## storing the peer membership.
    ##
    ## It might be useful to override this in any situation where multiple
    ## Refinery clusters or multiple applications want to share a single
    ## Redis instance. It may not be blank.
    ##
    ## default: refinery
    ## Not eligible for live reload.
    # Prefix: refinery

    ## Database is the database number to use for the Redis instance storing
    ## the peer membership.
    ##
    ## An integer from 0-15 indicating the database number to use for the
    ## Redis instance storing the peer membership. It might be useful to set
    ## this in any situation where multiple Refinery clusters or multiple
    ## applications want to share a single Redis instance.
    ##
    ## Not eligible for live reload.
    # Database: 0

    ## UseTLS enables TLS when connecting to Redis for peer cluster
    ## membership management.
    ##
    ## When enabled, this setting sets the `MinVersion` in the TLS
    ## configuration to `1.2`.
    ##
    ## Not eligible for live reload.
    # UseTLS: false

    ## UseTLSInsecure disables certificate checks when connecting to Redis
    ## for peer cluster membership management.
    ##
    ## This setting is intended for use with self-signed certificates and
    ## sets the `InsecureSkipVerify` flag within Redis.
    ##
    ## Not eligible for live reload.
    # UseTLSInsecure: false

    ## Timeout is the timeout to use when communicating with Redis.
    ##
    ## It is rarely necessary to adjust this value.
    ##
    ## Accepts a duration string with units, like "5s".
    ## default: 5s
    ## Not eligible for live reload.
    # Timeout: 5s

#########################
## Collection Settings ##
#########################
Collection:
  ## Collection contains the settings that are relevant to collecting spans
  ## together to make traces. If none of the memory settings are used, then
  ## Refinery will not attempt to limit its memory usage. This is not
  ## recommended for production use since a burst of traffic could cause
  ## Refinery to run out of memory and crash.
  ##
  ####
    ## CacheCapacity is the number of traces to keep in the cache's circular
    ## buffer.
    ##
    ## The collection cache is used to collect all spans into a trace as well
    ## as remember the sampling decision for any spans that might come in
    ## after the trace has been marked "complete" (either by timing out or
    ## seeing the root span). The number of traces in the cache should be
    ## many multiples (100x to 1000x) of the total number of concurrently
    ## active traces (trace throughput * trace duration).
    ##
    ## default: 10000
    ## Eligible for live reload.
    # CacheCapacity: 10_000

    ## PeerQueueSize is the maximum number of in-flight spans redirected from
    ## other peers stored in the peer span queue.
    ##
    ## The peer span queue serves as a buffer for spans redirected from other
    ## peers before they are processed. In the event that this queue reaches
    ## its capacity, any subsequent spans will be discarded. The size of this
    ## queue is contingent upon the number of peers within the cluster.
    ## Specifically, with N peers, the queue's span capacity is determined by
    ## (N-1)/N of the total number of spans. Its minimum value should be at
    ## least three times the `CacheCapacity`.
    ##
    ## default: 30000
    ## Not eligible for live reload.
    # PeerQueueSize: 30_000

    ## IncomingQueueSize is the number of in-flight spans to keep in the
    ## incoming span queue.
    ##
    ## The incoming span queue is used to buffer spans before they are
    ## processed. If this queue fills up, then subsequent spans will be
    ## dropped. Its minimum value should be at least three times the
    ## `CacheCapacity`.
    ##
    ## default: 30000
    ## Not eligible for live reload.
    # IncomingQueueSize: 30_000

    ## AvailableMemory is the amount of system memory available to the
    ## Refinery process.
    ##
    ## This value will typically be set through an environment variable
    ## controlled by the container or deploy script. If this value is zero or
    ## not set, then `MaxMemoryPercentage` cannot be used to calculate the
    ## maximum allocation and `MaxAlloc` will be used instead. If set, then
    ## this must be a memory size. Sizes with standard unit suffixes (such as
    ## `MB` and `GiB`) and Kubernetes units (such as `M` and `Gi`) are
    ## supported. Fractional values with a suffix are supported. If
    ## `AvailableMemory` is set, `Collections.MaxAlloc` must not be defined.
    ##
    ## Eligible for live reload.
    # AvailableMemory: "4.5Gb"

    ## MaxMemoryPercentage is the maximum percentage of memory that should be
    ## allocated by the span collector.
    ##
    ## If nonzero, then it must be an integer value between 1 and 100,
    ## representing the target maximum percentage of memory that should be
    ## allocated by the span collector. If set to a non-zero value, then once
    ## per tick (see `SendTicker`) the collector will compare total allocated
    ## bytes to this calculated value. If allocation is too high, then traces
    ## will be ejected from the cache early to reduce memory. Useful values
    ## for this setting are generally in the range of 70-90.
    ##
    ## default: 75
    ## Eligible for live reload.
    # MaxMemoryPercentage: 75

    ## MaxAlloc is the maximum number of bytes that should be allocated by
    ## the Collector.
    ##
    ## If set, then this must be a memory size. Sizes with standard unit
    ## suffixes (such as `MB` and `GiB`) and Kubernetes units (such as `M`
    ## and `Gi`) are supported. Fractional values with a suffix are
    ## supported. See `MaxMemoryPercentage` for more details. If set,
    ## `Collections.AvailableMemory` must not be defined.
    ##
    ## Eligible for live reload.
    # MaxAlloc: ""

##################
## Buffer Sizes ##
##################
BufferSizes:
  ## BufferSizes contains the settings that are relevant to the sizes of
  ## communications buffers.
  ##
  ####
    ## UpstreamBufferSize is the size of the queue used to buffer spans to
    ## send to the upstream Collector.
    ##
    ## The size of the buffer is measured in spans. If the buffer fills up,
    ## then performance will degrade because Refinery will block while
    ## waiting for space to become available. If this happens, then you
    ## should increase the buffer size.
    ##
    ## default: 10000
    ## Eligible for live reload.
    # UpstreamBufferSize: 10_000

    ## PeerBufferSize is the size of the queue used to buffer spans to send
    ## to peer nodes.
    ##
    ## The size of the buffer is measured in spans. If the buffer fills up,
    ## then performance will degrade because Refinery will block while
    ## waiting for space to become available. If this happens, then you
    ## should increase this buffer size.
    ##
    ## default: 100000
    ## Eligible for live reload.
    # PeerBufferSize: 100_000

###############################
## Specialized Configuration ##
###############################
Specialized:
  ## Specialized contains special-purpose configuration options that are
  ## not typically needed.
  ####
    ## EnvironmentCacheTTL is the duration for which environment information
    ## is cached.
    ##
    ## This is the amount of time for which Refinery caches environment
    ## information, which it looks up from Honeycomb for each different
    ## `APIKey`. This information is used when making sampling decisions. If
    ## you have a very large number of environments, then you may want to
    ## increase this value.
    ##
    ## Accepts a duration string with units, like "1h".
    ## default: 1h
    ## Eligible for live reload.
    # EnvironmentCacheTTL: 1h

    ## CompressPeerCommunication determines whether Refinery will compress
    ## span data it forwards to peers.
    ##
    ## If it costs money to transmit data between Refinery instances (for
    ## example, when spread across AWS availability zones), then you almost
    ## certainly want compression enabled to reduce your bill. The option to
    ## disable it is provided as an escape hatch for deployments that value
    ## lower CPU utilization over data transfer costs.
    ##
    ## default: true
    ## Not eligible for live reload.
    # CompressPeerCommunication: true

    ## AdditionalAttributes is a map that can be used for injecting
    ## user-defined attributes into every span.
    ##
    ## For example, it could be used for naming a Refinery cluster. Both keys
    ## and values must be strings.
    ##
    ## Eligible for live reload.
    # AdditionalAttributes:
      #  environment: production
      #  ClusterName: MyCluster

###############
## ID Fields ##
###############
IDFields:
  ## IDFields controls the field names to use for the event ID fields.
  ## These fields are used to identify events that are part of the same
  ## trace.
  ##
  ####
    ## TraceNames is the list of field names to use for the trace ID.
    ##
    ## The first field in the list that is present in an incoming span will
    ## be used as the trace ID. If none of the fields are present, then
    ## Refinery treats the span as not being part of a trace and forwards it
    ## immediately to Honeycomb.
    ##
    ## Eligible for live reload.
    # TraceNames:
      # - trace.trace_id
      # - traceId

    ## ParentNames is the list of field names to use for the parent ID.
    ##
    ## The first field in the list that is present in an event will be used
    ## as the parent ID. A trace without a `parent_id` is assumed to be a
    ## root span.
    ##
    ## Eligible for live reload.
    # ParentNames:
      # - trace.parent_id
      # - parentId

############################
## gRPC Server Parameters ##
############################
GRPCServerParameters:
  ## GRPCServerParameters controls the parameters of the gRPC server used
  ## to receive OpenTelemetry data in gRPC format.
  ##
  ####
    ## Enabled specifies whether the gRPC server is enabled.
    ##
    ## If `false`, then the gRPC server is not started and no gRPC traffic is
    ## accepted.
    ##
    ## default: true
    ## Not eligible for live reload.
    # Enabled: false

    ## ListenAddr is the address Refinery listens to for incoming GRPC
    ## OpenTelemetry events.
    ##
    ## Incoming traffic is expected to be unencrypted, so if using SSL, then
    ## put something like `nginx` in front to do the decryption.
    ##
    ## Should be an ip:port like "".
    ## Not eligible for live reload.
    # ListenAddr: ""

    ## MaxConnectionIdle is the amount of time to permit an idle connection.
    ##
    ## A duration for the amount of time after which an idle connection will
    ## be closed by sending a GoAway. "Idle" means that there are no active
    ## RPCs. "0s" sets duration to infinity, but this is not recommended for
    ## Refinery deployments behind a load balancer, because it will prevent
    ## the load balancer from distributing load evenly among peers.
    ##
    ## Accepts a duration string with units, like "1m".
    ## default: 1m
    ## Not eligible for live reload.
    # MaxConnectionIdle: 1m

    ## MaxConnectionAge is the maximum amount of time a gRPC connection may
    ## exist.
    ##
    ## After this duration, the gRPC connection is closed by sending a
    ## `GoAway`. A random jitter of +/-10% will be added to
    ## `MaxConnectionAge` to spread out connection storms.
    ## `0s` sets duration to infinity; a value measured in low minutes will
    ## help load balancers to distribute load among peers more evenly.
    ##
    ## Accepts a duration string with units, like "3m".
    ## default: 3m
    ## Not eligible for live reload.
    # MaxConnectionAge: 3m

    ## MaxConnectionAgeGrace is the duration beyond `MaxConnectionAge` after
    ## which the connection will be forcibly closed.
    ##
    ## This setting is in case the upstream node ignores the `GoAway`
    ## request. "0s" sets duration to infinity.
    ##
    ## Accepts a duration string with units, like "1m".
    ## default: 1m
    ## Not eligible for live reload.
    # MaxConnectionAgeGrace: 1m

    ## KeepAlive is the duration between keep-alive pings.
    ##
    ## After this amount of time, if the client does not see any activity,
    ## then it pings the server to see if the transport is still alive. "0s"
    ## sets duration to 2 hours.
    ##
    ## Accepts a duration string with units, like "1m".
    ## default: 1m
    ## Not eligible for live reload.
    # KeepAlive: 1m

    ## KeepAliveTimeout is the duration the server waits for activity on the
    ## connection.
    ##
    ## This is the amount of time after which if the server does not see any
    ## activity, then it pings the client to see if the transport is still
    ## alive. "0s" sets duration to 20 seconds.
    ##
    ## Accepts a duration string with units, like "20s".
    ## default: 20s
    ## Not eligible for live reload.
    # KeepAliveTimeout: 20s

    ## MaxSendMsgSize is the maximum message size the server can send.
    ##
    ## The server enforces a maximum message size to avoid exhausting the
    ## memory available to the process by a single request. The size is
    ## expressed in bytes.
    ##
    ## default: 5MB
    ## Not eligible for live reload.
    # MaxSendMsgSize: ""

    ## MaxRecvMsgSize is the maximum message size the server can receive.
    ##
    ## The server enforces a maximum message size to avoid exhausting the
    ## memory available to the process by a single request. The size is
    ## expressed in bytes.
    ##
    ## default: 5MB
    ## Not eligible for live reload.
    # MaxRecvMsgSize: ""

##################
## Sample Cache ##
##################
SampleCache:
  ## SampleCache controls the sample cache used to retain information about
  ## trace status after the sampling decision has been made.
  ##
  ####
    ## KeptSize is the number of traces preserved in the cuckoo kept traces
    ## cache.
    ##
    ## Refinery keeps a record of each trace that was kept and sent to
    ## Honeycomb, along with some statistical information. This is most
    ## useful in cases where the trace was sent before sending the root span,
    ## so that the root span can be decorated with accurate metadata. Default
    ## is `10_000` traces. Each trace in this cache consumes roughly 200
    ## bytes.
    ##
    ## default: 10000
    ## Eligible for live reload.
    # KeptSize: 10_000

    ## DroppedSize is the size of the cuckoo dropped traces cache.
    ##
    ## This cache consumes 4-6 bytes per trace at a scale of millions of
    ## traces. Changing its size with live reload sets a future limit, but
    ## does not have an immediate effect.
    ##
    ## default: 1000000
    ## Eligible for live reload.
    # DroppedSize: 1_000_000

    ## SizeCheckInterval controls how often the cuckoo cache re-evaluates its
    ## remaining capacity.
    ##
    ## This cache is quite resilient so it does not need to happen very
    ## often, but the operation is also inexpensive. Default is 10 seconds.
    ##
    ## Accepts a duration string with units, like "10s".
    ## default: 10s
    ## Eligible for live reload.
    # SizeCheckInterval: 10s

###################
## Stress Relief ##
###################
StressRelief:
  ## StressRelief controls the Stress Relief mechanism, which is used to
  ## prevent Refinery from being overwhelmed by a large number of traces.
  ## There is a metric called `stress_level` that is emitted as part of
  ## Refinery metrics. It is a measure of Refinery's throughput rate
  ## relative to its processing rate, combined with the amount of room in
  ## its internal queues, and ranges from `0` to `100`. `stress_level` is
  ## generally expected to be `0` except under heavy load. When stress
  ## levels reach `100`, there is an increased chance that Refinery will
  ## become unstable.
  ## To avoid this problem, the Stress Relief system can do deterministic
  ## sampling on new trace traffic based solely on `TraceID`, without
  ## having to store traces in the cache or take the time processing
  ## sampling rules. Existing traces in flight will be processed normally,
  ## but when Stress Relief is active, trace decisions are made
  ## deterministically on a per-span basis; all spans will be sampled
  ## according to the `SamplingRate` specified here.
  ## Once Stress Relief activates (by exceeding the `ActivationLevel`), it
  ## will not deactivate until `stress_level` falls below the
  ## `DeactivationLevel`. When it deactivates, normal trace decisions are
  ## made -- and any additional spans that arrive for traces that were
  ## active during Stress Relief will respect the decisions made during
  ## that time.
  ## The measurement of stress is a lagging indicator and is highly
  ## dependent on Refinery configuration and scaling. Other configuration
  ## values should be well tuned first, before adjusting the Stress Relief
  ## Activation parameters.
  ## Stress Relief is not a substitute for proper configuration and
  ## scaling, but it can be used as a safety valve to prevent Refinery from
  ## becoming unstable under heavy load.
  ##
  ####
    ## Mode is a string indicating how to use Stress Relief.
    ##
    ## This setting sets the Stress Relief mode.
    ## "never" means that Stress Relief will never activate.
    ## "monitor" is the recommended setting, and means that Stress Relief
    ## will monitor the status of Refinery and activate according to the
    ## levels set by fields such as `ActivationLevel`.
    ## "always" means that Stress Relief is always on, which may be useful in
    ## an emergency situation.
    ##
    ## default: never
    ## Eligible for live reload.
    # Mode: never

    ## ActivationLevel is the `stress_level` (from 0-100) at which Stress
    ## Relief is triggered.
    ##
    ## This value must be greater than `DeactivationLevel` and should be high
    ## enough that it is not reached in normal operation.
    ##
    ## default: 90
    ## Eligible for live reload.
    # ActivationLevel: 90

    ## DeactivationLevel is the `stress_level` (from 0-100) at which Stress
    ## Relief is turned off.
    ##
    ## This setting is subject to `MinimumActivationDuration`. The value must
    ## be less than `ActivationLevel`.
    ##
    ## default: 75
    ## Eligible for live reload.
    # DeactivationLevel: 75

    ## SamplingRate is the sampling rate to use when Stress Relief is
    ## activated.
    ##
    ## All new traces will be deterministically sampled at this rate based
    ## only on the `traceID`. It should be chosen to be a rate that sends
    ## fewer samples than the average sampling rate Refinery is expected to
    ## generate.
    ## For example, if Refinery is configured to normally sample at a rate of
    ## 1 in 10, then Stress Relief should be configured to sample at a rate
    ## of at least 1 in 30.
    ##
    ## default: 100
    ## Eligible for live reload.
    # SamplingRate: 100

    ## MinimumActivationDuration is the minimum time that Stress Relief will
    ## stay enabled once activated.
    ##
    ## This setting helps to prevent oscillations.
    ##
    ## Accepts a duration string with units, like "10s".
    ## default: 10s
    ## Eligible for live reload.
    # MinimumActivationDuration: 10s

    ## MinimumStartupDuration is the minimum time that Stress Relief will
    ## stay enabled.
    ##
    ## This setting is used when switching into Monitor mode.
    ## When Stress Relief is enabled, it will start up in stressed mode for
    ## at least this set duration of time to try to make sure that Refinery
    ## can handle the load before it begins processing it in earnest. This is
    ## to help address the problem of trying to bring a new node into an
    ## already-overloaded cluster.
    ## If this duration is `0`, then Refinery will not start in stressed
    ## mode, which will provide faster startup at the possible cost of
    ## startup instability.
    ##
    ## Accepts a duration string with units, like "3s".
    ## default: 3s
    ## Eligible for live reload.
    # MinimumStartupDuration: 3s

###################################################
## Config values removed by the config converter ##
###################################################
  ## The following configuration options are obsolete and are not included
  ## in the new configuration:
  ##
    ## - PeerManagement.Strategy
    ## - Collector
    ## - InMemCollector.CacheOverrunStrategy
    ## - SampleCacheConfig/SampleCache.Type